Paratour - Happy
Bookmark and Share

Glider Shop
training

Cross


Made by


Light Reflex Paramotor Glider


 


Fast and stable glider, designed to be used by beginner pilots after their school training and recreational cross-country pilots.

This innovative design utilizes light weight fabrics making the Cross one of the easiest PPG glider to inflate and launch in zero wind condition.

TAKE-OFF
Extremely easy take-off ability in zero wind conditions.

LOW AND HIGH SPEED ABILITY
Low and high speed capacity with a full REFLEX profile,
combined with negative & positive trimmers.

MANEUVERABILITY
2D steering system, easy to maneuver with minimal brake pressure.

SAFETY
Flat aspect ratio limited to 5.18 for maximum passive safety.

LANDING
Soft and progressive energy management for smooth flare on landings .


 DESIGNED WITH THE FOLLOWING FEATURES:
  • 42 cells with 8 of them closed
  • Use of 29 gr/m² Nylon 6.6 light fabric on top and bottom surface of the canopy for a super easy inflation
  • Diagonal bands in all the cells
  • Mini-Ribs: between the cells of the trailing edge to improve performance and handling
  • Flexible nylon battens reinforcements
  • Advanced air foil design to boost and keep stable internal pressure
  • Advanced REFLEX profile for stability
  • Dual Trim System: Long trimmers for acceleration and negative trimmers for free-flight use
  • 2D steering system,  easy to maneuver with minimal brake pressure

 


Technical Data

XXS

XS

S

M

L

Flat area (m²)

19,6

21,4

22,9

24,7

26,4

Flat Aspect Ratio

5,18

5,18

5,18

5,18

5,18

Cells

42

42

42

42

42

Projected Aspect Ratio

4,23

4,23

4,23

4,23

4,23

Glider weight (kg)

3,9

4,3

4,7

5,1

5,5

Min speed (km/h)

24-26

24-26

24-26

24-26

24-26

Max speed (km/h)

65±5

65±5

65±5

65±5

65±5

Recommended pilot weight (kg)

50/80

65/95

80/110

95/125

110/140

Registration/Certification

DGAC
Pending

DGAC
Pending

DGAC
Pending

DGAC
Pending

DGAC
Pending




MATERIALS SPECIFICATIONS

Leading edge fabric: 40 gr/m² – 30D Nylon 6.6 high tenacity with PU+Silicone coating

Top/Bottom fabrics: 29 gr/m² – 20D Nylon 6.6 high tenacity with PU+Silicone coating

Profiles: Pro-Nyl 36 gr/m²  High Tenacity Nylon Rip-Stop hard finish

Reinforcements:  2,5 mm Nylontab (Profile front)

Lines:
Cousin Technora® 1,1 mm – 104,1 daN
Cousin Technora® 1,5 mm – 139,3 daN
Cousin Technora® 2,1 mm – 238,6 daN
Cousin Technora® 2,5 mm – 382,0 daN

Risers: 19 x 2,0 mm 1600kg


Choice of Colors